MAD 5012 IPE V3.0 Brushless Motor
MAD 5012 IPE V3.0 Brushless Motor
The MAD 5012 IPE V3.0 Brushless Motor is engineered for high-performance industrial drone applications.
Single rotor load range: 1500-3000g
Continuous working thrust: suitable for stable flight or industrial tasks, balancing efficiency and heat dissipation.
Application scenario: Higher load limit than MAD5010 IPE (1300-2500G), ideal for higher redundancy or dynamic adjustment.
Single maximum thrust: 6.1kg
Instantaneous explosive force: short-term peak thrust for wind resistance, avoiding continuous overload to prevent overheating.
Comparative boost: 17% more than the MAD5010 EEE's 5.2kg peak for demanding power needs.
propeller compatibility: 18-22 inch carbon fiber propeller
Efficiency balance: Focused on medium and large blade optimization, reducing vibration and energy loss.
| Specification |
|||||||||
| Motor Model |
MAD 5012 IPE V3.0 |
Number of pole pairs |
14 | ||||||
| Stator |
Anticorrosive |
Varnished wire Degree |
180°C | ||||||
| Motor Size |
D:56 × 33.3 mm |
Magnet Degree |
150°C |
||||||
| Degree of Protection |
IP45 | Cable Length |
150 mm 16# Awg(Black) silicone |
||||||
| Centrifugal Heat Dissipation |
YES | Rotor Balance |
≤5 mg |
||||||
| Propeller Mounting Holes |
D:12 M3×4, D:15 M3×4 |
Motor Balance |
≤10 mg |
||||||
| Shaft Diameter |
IN: 6 mm |
Motor Mounting Holes |
D:25 M3×4 | ||||||
| Bearing | EZO 696ZZ*2 |
Disruptive test |
500 V |
||||||
MAD 5012 IPE V3.0 Brushless Motor Key Highlights
Sustained thrust: 1.5-3.0kg
Max thrust: 6.1kg
Support voltage: 4S; 6S
Weight: 189~200g
Applicable Models:
• Multi-rotor drones
Multi-axis drones
Recommended Accessories:
– ESCs: AMPX 40A (5-14S) HV, AMPX 40A PRO (2-6S)
– Propellers: FLUXER PRO 18x6.1 MATT, HAVOC 18x5.7 folding propeller, FLUXER PRO 19x5.7 MATT, FLUXER PRO 20x6.0 MATT, FLUXER PRO 21x6.3 MATT, FLUXER PRO 22x6.6 MATT, HAVOC 22x7.0 folding propeller
Selection and Installation Notes:
• Match propeller size and pitch to your aircraft configuration to avoid overload.
• Use an appropriate ESC and wiring harness for continuous and peak currents.
Ensure structural supports can withstand torque and dynamic loads.
Perform a balance check before each manned flight.
Local aviation and manned flight regulations must be followed.
Frequently Asked Questions:
Q: Which propeller should I use?
A: – Propellers: FLUXER PRO 18x6.1 MATT, HAVOC 18x5.7 folding propeller, FLUXER PRO 19x5.7 MATT, FLUXER PRO 20x6.0 MATT, FLUXER PRO 21x6.3 MATT, FLUXER PRO 22x6.6 MATT, HAVOC 22x7.0 folding propeller
Q: Which ESC is compatible?
A: Please use the model provided by the manufacturer: – ESC: AMPX 40A (5-14S) HV, AMPX 40A PRO (2-6S)
Q: What is the delivery time?
A: Delivery time is usually 7-14 days; please confirm stock at checkout.
160KV：
250KV：
320KV：
340KV：
